LoveinDIY Kakute F4 AIO V2 Controller PDB HV V2 Set for RC Drones Parts

Price: $90.99
(as of Apr 02,2021 00:04:58 UTC – Details)

Description:
– Kakute F4 AIO V2
– Additional UART 4 and UART 5.Barometer sensor.I2C pad.
– Supports Betaflight and Cleanflight.Betaflight OSD. Change PIDs, adjust common configuration parameters, and change video transmitter channel and power level.
– IMU mounted on vibration-isolating foam.
– 2 oz. copper PCB, 120A max. continuous current.Input voltage 7v-42v. Power the board directly from the pack, up to 6S (“B+” pad only).On-board regulators output 5v at up to 1.5 amps and 3.3v at up to 200 mA to power peripherals.
– Supports BLHeli pass-through for easy ESC upgrade and configuration.
– HV V2
– Supports standard 40-channel set: band A, B, E, , and Raceband.
– With SmartAudio.
– Parameters controllable via push-button when without SmartAudio.
– Transmit power 25-800 mW. 0.5mW Ture Mode. 36mm form factor.
Specification:
– Kakute f4 AIO V2
– MCU: STM32F405RGT6 32-bit processor
– IMU: ICM20689 (SPI)
– Barometer: BMP280
– USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
– 5 hardware UARTS (UART1, 3, 4, 5, 6)
– Supports serial receivers (SBUS, iBus, , Crossfire) only. PPM and PWM receivers not supported.
– 128 Mbit Dataflash chip for Blackbox logging
– Size: 35x43x7mm (includes USB in height)
– Mounting Holes: 30.5mm
– HV V2
– Transmitting Output Power: 25/200/500/800mW Switchable
– Audio: 6 MHz + 6.5 MHz Mono
– Antenna Connector: MMCX
– Input Voltage: 7-28V (2-6S Lipo)
– Dimension: 35(L)x 25(W)x 7(H)mm
– Mounting Hole: 30.5×30.5mm
Package Includes:
1x Kakute f4 AIO V2+ HV V2 stack

Note:
Color might be slightly different due to the color calibration of each individual monitor.
Please allow slightly measuring deviation due to manual measurement.
Supports Betaflight and Cleanflight.Betaflight OSD. Change PIDs, adjust common configuration parameters, and change video transmitter channel and power level.
IMU mounted on vibration-isolating foam.
2 oz. copper PCB, 120A max. continuous current.Input voltage 7v-42v. Power the board directly from the pack, up to 6S (“B+” pad only).On-board regulators output 5v at up to 1.5 amps and 3.3v at up to 200 mA to power peripherals.
Additional UART 4 and UART 5.Barometer sensor.I2C pad.
Kakute F4 AIO V2